You have 0 items in your cart.
Fluke
Sub Categories
Category:
Current Clamps
Current Range: 0.1 to 100A DC or 0.1 to 70A AC Basic Accuracy (DC to 1kHz): 100mV/A setting: 50mA to 10A +/- 3% of reading + 50mA 10mV/A setting: 50mA to 40A +/- 4% of reading + 50mA40A to 80A +/- 12% of reading + 50mA80 to 100A +/- 15% of reading Output Signal: 10A range: 100mV/A | 100A range: 10mV/A Bandwidth: 1Hz to 20kHz Working Voltage: 600V AC rms Maximum Conductor Size: 1.8 mm (.46 inch) diameter Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V
Category:
Fiber Optics
The compact FOM plugs into your DMM and makes testing in tight spaces easy A variety of light sources (FOS 850, FOS 1300, and FOS 850/1300) and patch cords (ST to ST, ST to FC, ST to SC, ST to SMA) let you get just what you need for testing different cable types and lengths Highly accurate readings mean less work, less repeated testing Input connector: fixed ST Battery life: 16 hours minimum, 9V alkaline LED low battery indicator Operating temperature: 0°C to +40°C (32°F to +104°F) Storage temperature: -20°C to +70°C (-4°F to +158°F)
Category:
CarePlans & warranties
Repairs are always unexpected, and they can be costly. Keep your camera in top operating condition and control your cost of ownership with a Fluke Gold CarePlan. Maintain you camera in peak operating condition and protect your investment beyond your factory warranty for up to three additional years.
Category:
Gas Measurement
The CO-205 accessory kit includes: Stainless steel sampling tube Industrial-grade hand operated aspirator to draw flue sample Easy to replace particulate filter Specially designed nose cap for connection to the Fluke CO-210/220 4' (1.2m) hose length
Category:
Combo Test Kits
Wide temperature range from -30° to 650°C (–20° to 1202°F) 12:1 distance-to-spot ratio ±1% Accuracy of the reading. Dual lasers to accurately identify spot size Rugged performance Survives 9.8 foot/3 meter drops to wood floors Water and dust resistance IP54 rated to withstand rain, splashing liquids, dust and dirt Small and easy to use Ergonomic fit to "feel" good in your hand Multi-angle Backlit display
Category:
High Voltage Probes
A high voltage probe that allows a multimeter to measure up to 6,000V respectively. Intended for low energy applications only One year warranty
Category:
Current Clamp DMM Accys
Current Range: 0.1 to 100A DC or 0.1 to 70A AC Basic Accuracy (DC to 1kHz): 100mV/A setting: 50mA to 10A +/- 3% of reading + 50mA 10mV/A setting: 50mA to 40A +/- 4% of reading + 50mA40A to 80A +/- 12% of reading + 50mA80 to 100A +/- 15% of reading Output Signal: 10A range: 100mV/A | 100A range: 10mV/A Bandwidth: 1Hz to 20kHz Working Voltage: 600V AC rms Maximum Conductor Size: 1.8 mm (.46 inch) diameter Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V
Category:
Current Clamp Meters
600 A ac current measurement with fixed jaw 600 V ac and dc voltage measurement True-rms ac voltage and current for accurate measurements on non-linear signals Resistance measurement to 6000Ω with continuity detection 1000 µF capacitance measurement State of the art signal processing allows for use in noisy electrical environments while providing stable readings Large, easy to read, backlight display automatically sets the correct measurement range so you do not need to change switch positions while taking a measurement CAT IV 300 V, CAT III 600 V safety rating