THR1300A-SX.V2 9-ZONE ADVANCED WALK-THRU METAL DETECTOR WITH RIGHT/LEFT LED LIGHTS, REAL-TIME CAMERA SERIES

Contemporary Design, SMART DETECTOR, 9 Multizone, Separete Zone Sensitivity, LED Zone
Indicators, 20 Security Levels‐ 246 steps, Detects ECAC threat objects, IP 44, 5 digit counters,
Real Time Telemetry Program,

ITEM NO.

FEATURES

ThruScan/sX

1

Technology

Microprocessor Based Digitally Controlled Pulse Induction with Very Low Frequency and No Harmful Effects on Human Health

2

Detection Zones

9

3

LED Zone Indicator Lights On Side Panels

YES (Continuous LED Indicators on BOTH (Left/Right) Side Panels of the WTMD)

4

Separate Zone Sensitivity Setting Feature

Yes (Enables adjusting different Sensitivity Levels for Different Height Levels of the WTMD Passage)

5

Throughput Rate

(Detection Speed)

60 Person/Minute

6

Sensitivity level

20 Levels / 246 Sub Sensitivity Settings

7

Alarm Counter

YES/5 digit

8

Counter Incoming & Outgoing

TWO WAY COUNTER IN/OUT

(5 digit)

9

Green/Red Bicolor Traffic Through LED Indication

YES

10

Tri-Color Metal Density Display Vu-Meter LED Bar Graph

YES

11

Auto Calibration

YES

12

Perform Self Test at Start Up and Continuously Check the System for Failures with Automatic Failure Display Function

YES

13

Environmental Magnetic Noise Level Display Feature

YES

14

Mechanical Lock for

Menu Access

YES

MECHANICAL LOCK +

4 Digit PIN Code

15

LCD

4*20 Character

16

IP Protection Level

IP 44 (EN 60529)

17

IR Pass Sensor ON/OFF Feature for continuously Active or Sensor Activated Detection Mode Selections

Yes

(Continuously Active / Sensor Activated)

18

Automatic Sensitivity Selection for Target Metallic Objects (Smart Detector)

Yes

19

SCADA

YES (Real Time Remote Monitoring of Detections with audio-visual indications delivered to your PC up to 100 m cable connection and Remote Access to Settings)

Software Optional

20

Battery ON/OFF feature enabling Operation Without Mains / 2 hrs Continuous Operation Against Electricity Cut Offs

Yes

21

Battery Operation LED indicator on Control Unit

Yes

22

Automatically Shut Down the WTMD to prevent battery from deep discharge

Yes (After an Audio-Visual Low Battery Signal the WTMD Shuts Down Automatically in Battery Mode Operation)  

23

Relay Output

Yes

24

Real-Time Video Prosecution Unit

Yes (Optional)

Camera Assembly/Embedded DVR Unit/SD Card/Video Out Socket for TV Connection (TV Not Included in Package)

25

IRDA (Pilot) Remote Control Unit

Yes (Optional)

26

Audio/Visual Alarm Range

4 meter

27

Automatic Frequency Selection Feature for Interference Free Operation of Multiple WTMDs

YES

28

Interference free operation

10cm distance constant metal/

200cm distance moving metallic object

29

Ambient Temperature

-20'C to 70'C

30

Weight

56Kg


International norms (NILECJ-0601 L1-5/IP44/EN60950 Class1) In conformity with CE European Union Norms and produced under ISO 9001: 2008 QMS
Multi-Zone - 9 Real Detection Zones(Up/Middle/Down and Left/Middle/Right)
Separate Zone Sensitivity Setting Feature
Whilst Normal Operation, displays IN/OUT Counters and Security Level on LCD without abbreviations so that Security Staff can easily understand
Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities. Can detect when tested both individually and in combination and Gives Audio-Visual Alarms. Can operate at JAILHOUSE Sensitivity Spectrums!..

SMART DETECTOR – Fast and consistent calibration, Automatic Sensitivity Program selects the correct sensitivity for a specific weapon or a recognized test object

Displays the Detected Metal Objects location on Both Side Panels LEFT/RIGHT from bottom to top with Continuous LED Zone Indicators
Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.
No Interferences between Zones and No False Alarms

Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top
Detects Metals regardless their orientation

20 sensitivity levels, 246 adjustable sensitivity steps at each, Preset NILECJ Sensitivity Program, Optional - 5 Preset Programs

Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LEDs easily allows sight from distance
Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit

Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By

Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media
Green/Red bicolor traffic through LEDs easily allows sight from distance 60 Persons/Minute and LED Alarm Indicators on side panels
Operation Mode, Programming Parameters and Error Codes are Displayed on Wide 4x20 Characters LCD Screen
Special Environmental Magnetic Interference Display Menu

Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation

Adjustable Alarm Duration (Detection Speed Regardless Alarms)

IR Protection Feature enabling perfect low false alarm operation/ Continuous Detection Mode Selection Enabled

IP 44 Protection Level (EN 60529)

Five Digit Incoming/ Outgoing & Alarm Counters (Visible/Invisible) can be reset to Zero
Interference free Operation from other Electronic Devices and Does Not affect other Electronic Equipments. Necessary filtering precautions have been taken

Four-digit changeable digital Pin Code and Mechanical Lock
Automatic Failure Display Function on LCD

Reloading the factory default settings by one-touch button

Easy Programming and Display via High Resolution LCD (Liquid Crystal Display)

4 Menu Languages, Standard menu in English, German, Spanish and Turkish

Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc. on Alarms

STANDARD Built-in Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains

Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design

Manufactured for 7/24 Continuous Operation
74 cm Net Passage Width and 200 cm Net Passage Height
Interference free Operation at Middle Level Sensitivity of 10 cm Distance Constant Metals and 150 cm distance Moving Metallic Objects

Installation and Operation without interference between two detectors up to a distance of min. 5 cm

Audio-Visual alarms are noticeable at a range of 4 meters

Micro-Processor Settings does not change when there is an electricity cut-off

All Electronic Units (electronic unit, power supply, battery, adapter etc..) are inside the Equipment. No outer units.
Floor Fixing Corrosion Resistant Metal Footers for proper assembly and durable use.

Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment)
SCADA Remote Control Set - Send Receive- Change settings by PC, Audio-Visual alarms can be monitored Real Time by PC and can be logged into Hard Disk Software Optional

REAL-TIME VIDEO PROSECUTION UNIT enabling recording Alarmed Visitors Pictures/All Visitors pictures or video with Time-Stamp to SD Card ~30.000 ImagesOptional


•Weight: 56 kg

•Gross weight: 64 kg

•Operating voltage:70VAC – 270VAC / 50Hz - 60Hz ? Power: 10W Stand By- 20W (Alarm)

•Package Dimensions (W x H x L): Box 1: 620 x230 x 2265 mm Box 2: 790 x 230 x 400 mm

•Ambient Temperature: -20°C to +70°

Location

Ask about this product